Sikawall 08 W Sika Fixative 2L Sika

SikaWall 08 W Fixative is a single-component, water-based, acrylic primer designed to fix and seal porous surface backgrounds for subsequent painting.

SikaWall 08 W Fixative is a single-component, water-based, acrylic primer designed to fix and seal porous surface backgrounds for subsequent painting.

CARACTERISTICS

• Prevents dust dragging when painting
• Events dust dragging when painting
• Easily removes dust when painting.
• Facilitates the adhesion of subsequent painting
• It does not contain solvents
• It does not contain solvents.
• It does not contain solvents
• It does not contain solvents
• Improves the performance of subsequent paints
• It does not hinder the adhesion of the paint.
• It does not hinder the breathability of the facing.

USES

As a fixing layer for the following uses:

• Coat the treated surfaces to avoid the detachment of the paints.
• Tapping porosity to obtain homogeneous paint coatings afterwards
• Boosting the porosity to obtain homogeneous paint coatings
• Improve the adhesion of paints on porous surfaces.

Some of the surfaces on which it can be applied are:

• Cement plaster
• Cement plaster
• Gypsum and laminates
• Temple
• Lime and plaster
• Lime and plaster

SPECIFICATIONS

.

• Color: White
• Presentation: 2 liter carafes.
• Chemical base: Acrylic resin in aqueous dispersion.
• Density ~ 1.01 gr/cm3

Application Details

• Consumption ~ 100 g/m2, depending on the porosity of the substrate.
• Substrate Quality: The substrate should be dry, sound, free of loose parts or poorly adhered particles. Previous coatings must be removed. For very degraded surfaces, it is recommended to test first.

Application Instructions

• Mixing: The product is ready for use. It is recommended to homogenize the mixture by shaking the container prior to application.
• Mixing.
• Mixing time: Approx. 1 minute

. Method of Application / Tools: Once mixed, the product can be applied by brush or roller. Method of Application / Tools: The product once mixed can be applied by brush or roller. Tool Cleaning: Clean tools and application equipment immediately after use with water. Hardened product may only be removed by mechanical means. Cleaning Tools: Clean tools and application equipment immediately after use with water. Dwell time / Repaintability.

Substrate temperature +8°C +20°C +20°C +35°C
Time 4 hours 2 hours 1 hour

Only aqueous dispersion paints may be used for painting

.

Application notes / Limitations

More than one coat may be required on very absorbent substrates. In environments with high relative humidity, drying times may increase. Do not apply on stained substrates. In areas where it will not be covered as door frames, fences, etc. should be protected from contact with the product. In case of splashes, clean them immediately with a damp cloth.