Ceys Antidampness Paint Paint Can Aguastop Ceys

• Plaster, cardboard, cement-based mortar rendering, prior ceramic tile installation, site materials.

AVAILABLE SIZES

• Bot of 1 kg
• Bot of 4 kg

HOW TO USE

Preparation of the support

• The surfaces to be treated must be free of dust, saltpetre, mildew, old paint residues and other disintegrated materials that could reduce the adhesion capacity of the product.
• If the surface is in very bad condition (flaking plaster or plastering, lifted paint, blisters, etc.), the area must be cleaned and the substrate must be well reconstructed before applying.
• If the surface has black stains or mildew, clean previously with bleach or specific products for the elimination of mildew, algae or verdigris.
• Always remove the product before application.

Dampness coming from outside (back pressure)

.

• Apply directly on the building material, eliminating, if any, any disaggregable material (plaster, render, etc.)
• Apply directly on the building material, eliminating, if any, any disaggregable material (plaster, render, etc.).
• Apply two crossed coats of product at an approximate consumption of 0.5 Kg/m2 per coat, allowing 6 to 8 h between coats to dry.

Dampness coming from the interior (Condensation)

• With the substrate clean and dry following the substrate preparation instructions, apply two crossed coats of product at an approximate consumption of 0.5 Kg/m2 per coat, allowing 6 to 8 h between coats to dry. Let dry a minimum of 12 hours before painting with an acrylic paint as a finish..

TIPS AND PRECAUTIONS

.

• Applicable by brush or roller. After use, clean the utensils with solvent.
• Application temperature between 5º C and 35º C.
• Application temperature between 5º C and 35º C.
• It is not recommended to color or modify in any way the contents of the container. Once dry, it can be plastered, tiled or painted over with acrylic paint.
• If you see cracks of more than 3 mm in the substrate, repair before applying.
• If you see cracks of more than 3 mm in the substrate, repair before applying.
• For more information see technical data sheet.