• On sale!
  • -20%
KERACOLOR GG

Keracolor GG 5 kg Mapei Wide Gasket Sack

€10.02 €12.52 -20%
Tax included
Mapei's Keracolor GG consists of a mixture of cement, aggregates of suitable grain size, synthetic resins, special additives and pigments, class CG2. .  Read more
Colour
  • Beige
  • Brown
  • Chocolate
  • Anthracite
  • Cement Gray

 

Mapei's Keracolor GG consists of a mixture of cement, aggregates of suitable grain size, synthetic resins, special additives and pigments, class CG2.

CARACTERISTICS

Mixed with water in the indicated proportions and used in a timely manner, it allows grouts with the following characteristics to be obtained:

  • Good resistance to compression, bending and freeze-thaw cycles and, therefore, good durability.
  • Good resistance to abrasion
  • Low shrinkage and, therefore, absence of cracks and crevices
  • Good resistance to acids with pH > 3
  • Optimal price/performance ratio Performance ratio.

By mixing Keracolor GG with Fugolastic, a special polymeric additive based on synthetic resins, the final characteristics are improved, achieving adequate resistance even in severe service conditions (grouting on facades, swimming pools, bathrooms, floors subject to heavy traffic). For further information, please consult the Fugolastic technical data sheet.

.

RECOMMENDATIONS

  • Do not mix Keracolor GG with cement or other products and never add water to the setting mixture.
  • Never mix Keracolor GG with brackish or dirty water.
  • Use the product at temperatures between +5 °C and +35 °C.
  • The water in the mixture must be dosed accurately, since an excess can promote the appearance of a whitish patina on the surface of the grout (efflorescence). If mixtures with different mixing ratios are prepared, it is possible that they will have different color shades. The appearance of efflorescence on the grout surface is due to the formation of calcium carbonate and may also be caused by residual moisture contained in adhesives or substrates that are not dry or adequately protected from moisture rising.
  • After having filled the joints with the mixture, it is not advisable to sprinkle the grout with Keracolor GG powder, to avoid color inhomogeneity and reduction of the mechanical resistance.
  • When acid resistance and high hygiene are required, use suitable anti-acid grouts (e.g. Kerapoxy).
  • Expansion and movement joints on walls and floors should not be filled with Keracolor GG, but with suitable MAPEI elastic sealants.
  • Some tile or stone material surfaces sometimes present microporosities or roughness, which make final cleaning difficult. It is advisable to perform a preliminary test to verify cleanliness and, when necessary, to apply a protective treatment on the surface, preventing it from penetrating into the joints

APPLICATION FIELDS

.

Grouting, both indoors and outdoors, of ceramic floor and wall tiles of all types (single-fired, double-fired, porcelain stoneware, etc.), terracotta, facing bricks and stone material (natural stone, marble, granite, agglomerates, etc.).

Application fields

Application fields

Some examples of application

  • Filling joints in exterior facades, balconies, terraces and swimming pools
  • Filling joints in exterior facades, balconies, terraces and swimming pools.
  • Filling of rustic-finish paving
  • (terracotta, glazed porcelain tile, antiqued marble, klinker, monoction)
  • Filling of tile joints in walls and floors of buildings
  • Filling of tile joints in walls and floors of buildings
  • Filling of tile joints in walls and floors of buildings.
  • Filling of industrial ceramic floorings, where resistance to chemical agents is not required (garages, warehouses, etc.)

CONSUMPTION

.

  • The consumption of Keracolor GG varies according to the size of the joints, the format and thickness of the tiles. Some examples of consumption in kg/m2 are given in the table.

COLOR

  • 18 colors available

PRESENTATION

PRESENTATION

  • Bag of 5 kg
060066
5 Items
8022452017582

Grade Comments (0)

No customer reviews for the moment.