Ceys Montack Express Adhesive Cartridge is an immediate full tack assembly adhesive for strong and easy bonding. Maximum versatility all* materials: porous and non-porous, even delicate and wet surfaces. Indoors and outdoors.
*Not suitable for polyethylene (PE), polypropylene (PP), PTFE.
*Not suitable for polyethylene (PE), polypropylene (PP), PTFE.
CARACTERISTICS
.
-
- Excellent adhesion.
- High filling capacity.
- Interior-Exterior
- Permanent bonding
- Permanent bonding.
- Permanent bonding
- Permanent bonding
- Humidity and temperature resistance from -15 °C to +80 °C
- Humidity and temperature resistance between -15 °C and +80 °C
- Non-sagging
- Special, vertical applications
- Special, vertical applications
- DIRECT bonding: single-sided and without the need for airing
- Direct bonding: single-sided and without the need for airing
APPLICATIONS
.
. Panels, sheets, claddings and veneers. Skirting, skirting boards, moldings, transoms, profiles. Electrical boxes or panels, sockets, switches Hangers, soap dishes, handles and accessories in general Door and window frames Signage signs and decorative panels
MODE OF EMPLOYMENT
- CLEAN and dry well the surfaces to be joined.
- CLEAN and dry well the surfaces to be joined.
- APPLY Montack Xpress by pressing and pressing abundantly, by dots or beads, on one of the surfaces to be bonded.
- JOIN the pieces by moving them slightly to settle the adhesive well and PRESS hard for a few seconds.
Maximum strength is reached 24 hours after application.
.
Tips:
.
For gluing heavy objects, secure the joint physically, using tape or clamps, until the adhesive cures fully.
Please note that the adhesive should not be used for gluing heavy objects.
Maximum time to make the bond is 5 minutes
Storage and application temperature: +5 °C to +30 °C.
Storage and application temperature: +5 °C to +30 °C.
