Ultrabond MS Rapid Mapei Cartridge

Mapei's Ultrabond MS Rapid is a high viscosity, thixotropic adhesive, based on silane-modified polymers and therefore free of silicones and isocyanates, developed in MAPEI's R&D Laboratories.

Mapei's Ultrabond MS Rapid is a high viscosity, thixotropic adhesive, based on silane-modified polymers and therefore free of silicones and isocyanates, developed in MAPEI's R&D Laboratories.

CARACTERISTICS

/p>

With respect to polyurethane formulations, Ultrabond MS Rapid guarantees:

Further information.

compatibility even with wet substrates. easier extrusion, especially at low ambient temperatures Surface hardening. faster surface hardening faster surface hardening longer shelf life. the use of traditional plastic cartridges

Regarding neutral silicone formulations, Ultrabond MS Rapid offers:

better adhesion to construction substrates, both compact and absorbent better adhesion to the substrate better adhesion to the substrate. better initial "suction cup effect"/ absence of "product thread" at the end of the extrusion process better mechanical strength better mechanical resistance. higher mechanical resistance to tensile and shear strength possibility of painting with the elastomeric paints commonly used in the construction industry. absence of plasticizer migration and consequent contamination of the substrate.

Important warnings

Do not use on dusty or friable surfaces Do not use on dusty or friable surfaces. Do not apply on wet surfaces or surfaces exposed to rising damp. Do not use on surfaces soiled with oils, greases or release agents Do not use on surfaces soiled with oils, greases or release agents Do not use on bituminous surfaces Do not use on bituminous surfaces Do not use on bituminous surfaces. Do not apply Ultrabond MS Rapid at temperatures below +5° C Do not apply Ultrabond MS Rapid at temperatures below +5° C. Proceed to glue the elements just after extruding the adhesive, avoiding unnecessary waiting. Avoid contaminating the fresh product with alcoholic solvents.

APPLICATION FIELDS

• Ultrabond MS Rapid is a one-component, thixotropic, high elastic modulus, deformable adhesive based on silane-modified polymers, characterized by a high initial tack ("suction cup effect") and rapid final hardening.
• It is therefore recommended as an adhesive for gluing that requires, in a short time, a strong initial bond and high final mechanical strength.
• Compatibility with most building materials, both absorbent and non-absorbent, even when wet, and its rapid polymerization, allow Ultrabond MS Rapid to be used easily and practically in the construction and assembly of building and industrial components and finishes, replacing or complementing traditional mechanical fasteners.
• Suitable for gluing, indoors and outdoors, parapets, stone lintels, skirting boards, parquet, wooden or plastic cable covers, thermal and acoustic insulation panels, ceramic tiles and curved tiles, wall and door cladding, cladding boards and prefabricated elements.
• Specific, moreover, for the laying of Idrostop Soft, hydro-expansive bentonite gasket, for the waterproofing of concrete joints and the sealing of through bodies through concrete elements.

Some application examples

.

Suitable for the gluing and assembly of a multitude of materials, such as:

• Cement and derivatives
• Brick
• Stone
• Wood and derivatives
• Wood and derivatives
• Metals
• Pre-painted surfaces in general
• Pre-painted surfaces in general
• Ceramics
• Glass
• Rigid and flexible plastic materials*
• Idrostop Soft, hydro-expansive bentonite joint

CONSUMPTION

CONSUMPTION

.

• Depending on the gluing method used (stitch or bead).
• As an indication, a 300 ml cartridge covers 5 linear meters of adhesive bead with a triangular section 10 x 10 mm (base x height)

COLOR

• White

PRESENTATION

PRESENTATION

• Cartridge of 300 ml