Adesilex P22 Mapei Adhesive Tile Adhesive

Mapei's Adesilex P22 is a ready-to-use paste adhesive with zero vertical slip and extended open time for ceramic tiles (adhesive thickness up to 5 mm)

.

CARACTERISTICS

• Adesilex P22 is an aqueous dispersion adhesive based on acrylic resin, mineral fillers with controlled granulometry and various additives.
• Adesilex P22 is ready-to-use and comes in the form of a viscous paste, easily applied even vertically, with a particularly long open time.
• Once laid, the tile adheres immediately, even vertically, thanks to its excellent initial adhesion.
• The hardening of Adesilex P22 is produced by the evaporation of the water it contains until it becomes considerably flexible and forms an excellent bond that resists all types of vibrations and deformations of building materials
• The water resistance of Adesilex P22, although good, is inferior to that of cement-based hydraulic adhesives.

.

AIMPORTANT NOTICES

Do not use Adesilex P22 in the following cases:

• for exterior or continuous immersion applications (swimming pools, tanks, etc.);
• on metallic supports;
• for laying non-absorbent ceramic tiles on non-absorbent substrates;
• for laying non-absorbent ceramic tiles on non-absorbent substrates;
• for the laying of natural stone, especially if they are of a calcareous nature with a faint coloration (e.g. Carrara marble);
• for the laying of natural stone, especially if they are of a calcareous nature with a faint coloration (e.g. Carrara marble).

In this case use the specific product of the Mapei range.

In this case use the specific product of the Mapei range.

APPLICATION CAMPOSES

• Indoor adhesion of ceramic tiles and mosaics of all types on walls, ceilings and also on deformable substrates.
• Spot bonding of insulating materials such as polystyrene and expanded polyurethane, rock and glass wool, eraclit, expanded concrete elements, sound-absorbing panels, etc.

Some application examples

.

• Absorbent tiles on concrete walls, prefabricated or made on site.
• Absorbent tiles on concrete walls, prefabricated or made on site.
• Tiles on gypsum plaster, sprayed gypsum, prefabricated gypsum panels.
• Absorbent tiles on gypsum plaster, sprayed gypsum, prefabricated gypsum panels.
• Tiles on laminated plaster (plasterboard) walls.
• Tiles on gypsum plasterboard walls.
• Tiles on gypsum plasterboard walls.
• Tiles on painted walls.
• Tiles on painted walls.
• Tiles on painted walls.
• Absorbent tiles on old tiles.
• Absorbent tiles on old tiles.
• Absorbent tiles on old tiles.
• Large format tiles on walls.
• Large format tiles on walls.
• Large format tiles on walls.
• Assembly of insulating panels on plaster.
• Indulating panels on plaster.
• Large format tiles on walls.
• Erection of expanded polystyrene ceilings.

Adhesion of insulating materials

• Point laying of foam materials: 0.5-0.8 kg/m2
• Placement of foamed-cement elements: 1.5 kg/m2
• Laying on rough surfaces 2.5 kg/m2

COLOR

• White

PRESENTATION

• Bottle of 5 kg