Foam Can Manual Construction 700 ml Fischer

Fischer foam pot with rapid hardening for multiple applications, ideal for construction, assembly and DIY.

CHARACTERISTICS

• Paintable and sandable
• Window joint sealing
• Gap filling, blind boxes
• Assembly of electrical panels

PREPARATION

• Good adhesion on all typical construction materials such as brick, concrete, plaster, wood, rigid PVC, etc. The work surface must be clean and free of grease. Spray the surface with water beforehand. Product temperature between +15ºC and +30ºC. Surface temperature between +5ºC and +30ºC.

APPLICATION

• Put on protective gloves. Shake the bottle vigorously for 10-20 seconds keeping the valve pointing down. Screw the bottle onto the gun (the working position is with the valve down). Do not completely fill the gap, because the foam expands and could deform the carriage. For several layers, go moistening between layer and layer. It can be played at 10min, and cut at approx 40min. Does not adhere to PE, PP or PTFE.

CLEANING

• Fresh foam in a can or spray gun must be removed immediately with Fischer special cleaner. Dried foam is only removed by mechanical means.