Mapei Fuga Fresca Joint Dye Can 160g

Fuga Fresca is a ready-to-use paint that allows you to renew and change the color of cementitious joints in floor and wall coverings in a simple and fast way.

Fuga Fresca is used to eliminate differences in the color of the joints, caused, for example, by their incorrect execution, or to eliminate unsightly stains produced by the incorrect execution of the same.

Fuga Fresca is used to eliminate differences in the color of the joints, caused, for example, by an incorrect execution of the same, or to eliminate unsightly stains produced by the use.

Fuga Fresca is used to eliminate differences in the color of the joints, caused, for example, by an incorrect execution of the same, or to eliminate unsightly stains produced by the use.

TECHNICAL CHARACTERISTICS


Fuga Fresca is a polymeric paint based on acrylic resin in aqueous dispersion which, thanks to its special characteristics and excellent covering power, achieves joints of uniform color, with minimal water absorption and, therefore, very easy to clean.

Important warnings


- Do not use outdoors or on surfaces subject to continuous immersion (swimming pools, tanks, etc.).
- In the case of floors and coverings made of terracotta or stone materials with a porous and absorbent surface, the product should be applied only on the joints to avoid staining.
- Apply the product on basic cement joints after drying for at least 48 hours.
- Do not use on epoxy-based mortar, for joints, or on movement joints sealed with silicone or polyurethane products.
- Do not use Fuga Frescaco as a consolidant for inconsistent joints and with poor mechanical performance as a result of incorrect hydration.
- In case of contrast between old and new color, more treatments may be necessary.


METHOD OF APPLICATION

Bottle dosage
Shake the bottle before use. Remove the cap and apply the product by pressing with the sponge on the surface of the joint, clean and free of inconsistent parts, mold and traces of lime.wait a few minutes until the product applied on the joints is dry. Then use a damp sponge to remove any burrs that may have remained on the tiles. After use, carefully wash the sponge from the sponge bottle.


Bottle
The product is ready for use.

The product is ready for use.

CONSUMPTION
The consumption of Fuga Fresca varies according to the dimensions of the tiles and the joints.