Repair mortar 25kg Sika MonoTop-4012

Sika MonoTop40-12 is a one-component, fiber-reinforced, low-shrinkage repair mortar. It contains recycled materials in its composition and helps reduce the values obtained from the carbon footprint.

• Uses recycled materials in its composition
• Application thickness from 6 to 80 mm per coat
• Sulfate resistant

APPLICATIONS

• Sika MonoTop-4012 can only be used by experienced professionals. Repair of all types of reinforced concrete structures and components for:
  • building structure
  • Civil engineering structures
  • Marine structures
  • Dams
  • Structures that require a class mortar, R4, R3, R2 or R1.
  • Indoor and outdoor use.

ADVANTAGES

• Uses recycled materials in its composition
• Application thickness from 6 to 80 mm per coat
• Sulfate resistant
• Hand and machine application (wet spray technique)
• Does not require adhesion primer
• Low permeability
• A1 fire rating
• Low dust technology (low dust emission during handling)
• Class R4 of the EN 1504-3 standard
• Restoration works (Principle 3, method 3.1 and 3.3 of the EN 1504-9 standard) Repair of patches and damage to concrete in infrastructure and superstructure works
• Structural reinforcement (Principle 4, method 4.4 of the EN 1504-9 standard). Increasing the bearing capacity of the concrete structure by adding mortar
• Preservation and restoration of passivity (Principle 7, method 7.1 and 7.2 of EN 1504-9) - Increasing the coating with additional mortar and replacing contaminated or carbonated concrete

COLOR

• gray powder

CONTAINER

• 25 kg bag

PRODUCT DETAILS

• Chemical Base
  • Sulfate-resistant cement and cement replacement materials, selected aggregates and additives
• Conservation
  • 12 months from manufacturing date
• Storage conditions
  • The product should be stored in its original, unopened and undamaged packaging in dry conditions and at temperatures between +5°C and +35°C. Always check the packaging
• Maximum grain size
  • Dmax: 2mm
• Soluble Chloride Ion Content
  • ≤ 0.05%

APPLICATION

• Mixing Ratio
  • 3.50 to 3.75 L of water per 25 kg bag (14 to 15% water by weight of dry cement)
• Fresh mortar density
  • ~2.1kg/l
• Layer Thickness
  • 6 - 80mm
• Product Temperature
  • +5 °C min. / +30 °C max.
• Room temperature
  • +5 °C min. / +30 °C max.
• Mix life
  • ~60 minutes at +20°C
• Consumption
  • ~2.10kg/m2/mm
  • This figure is theoretical and does not take into account any additional material due to surface porosity, surface profile, level variations, shrinkage or any other variation. Apply the product in a test area to calculate the exact consumption for the specific conditions of the substrate and the proposed application equipment.
• Performance
  • 25 kg of powder is approximately 13.5 L of mortar