SikaRep 2300 repair mortar

One-component thyrotropic mortar, reinforced with synthetic fibers, formulated based on cements resistant to attack by sulphates, selected aggregates and special additives.

• Provides effective armor protection, even with minimal coatings
• Exceptional workability due to its cohesion and its thixotropic character
• excellent adhesion

APPLICATIONS

• Restoration of the original concrete (Principle 3 of the EN 1504-9 standard)
• Structural reinforcement of concrete (Principle 4 of standard EN 1504-9)
• Inside and outside. Horizontal and vertical
• Repair and/or structural reinforcement of slab fronts, pillars, girders, walls and reinforced concrete structures in buildings.
• Repair and/or structural reinforcement of pillars, abutments, bridge viagras and reinforced concrete structures in civil works.
• Repair and/or reinforcement of reinforced concrete pants structures and marine structures.

ADVANTAGES

• Provides effective armor protection, even with minimal coatings
• Exceptional workability due to its cohesion and its thixotropic character
• excellent adhesion
• Resistant to sulfate attack
• High initial and final mechanical resistance
• Closed porosity that considerably delays the progression of carbonation and protects the armor
• Low permeability to chlorides
• Reduced water absorption by capillarity
• compensated retraction
• Free of chlorides
• Excellent resistance to freeze-thaw cycles
• Manual and mechanical application by projection
• CE market, such as R3 repair mortar

APPLICATION INFORMATION

• Layer thickness: From 5 to 50 mm
• Mixing ratio: 18.5% water. 4,625 liters per 25 kg bag

CONSUMPTION

• 2.0kg/m2/mm
• 1 bag of 25 kg = 12.5 liters of mortar
• Consumption depends on the roughness and absorption of the support. This data is theoretical and does not include additional material due to porosity, roughness, irregularities, etc., which may cause material loss.

CONTAINER

• 25kg bag