- On sale!
- -2.49%
5L Sika Sikagard-790 All-in-One Protect 5L waterproofing for porous surfaces
Accesorios indispensables
Accesorios
BDPR400-XJ Black&Decker Speedyroller BDPR400-XJ Tank |
||
Rubi L-100 Hexagonal Liquid Mixing Rod - 15-25 kg/blend |
Sikagard®-790 All-in-One Protect does not form a film on the surface and is completely invisible. Sikagard®-790 All-in-One Protect is permeable to water vapor and, as a result, treated structures and surfaces maintain the same hydrothermal and hydric behavior.
Sikagard®-790 All-in-One Protect is completely invisible.
In addition, Sikagard®-790 All-in-One Protect facilitates the removal of graffiti that has been applied on these surfaces (with suitable cleaners).
USES
.
Sikagard®-790 All-in-One Protect can be used for the protection of facades, pavements and roofs made from common mineral building materials such as:
Sikagard®-790 All-in-One Protect.
- Natural stone such as granite, limestone, marble, etc., as well as engineered and reconstructed stone
- Terracotta tiles, clay/cement based, roof tiles.
- Concrete, cement and gypsum plasters, etc.
CARACTERISTICS
.
- Protection against water and oil penetration.
- Provides protection against the appearance of stains.
- Suitable for application on all types of facades, pavements and roofs
- Suitable for application on all types of facades, pavements and roofs.
- Suitable for use on most building materials
- Suitable for use on most building materials
- Suitable for use on most building materials.
- Provides invisible protection - does not alter appearance
- Allows the substrate to breathe
- Permits breathing.
- Resistant to UV rays
- Reduces the problem with graffiti, facilitating its removal
- Reduces the problem with graffiti, facilitating its removal
- Environmentally friendly - Low VOCs content
- Eco-friendly - Low VOCs content
- Environmentally friendly - Low VOCs content
- Consumption: Consumption will depend both on the porosity and the type of material. Orientatively, the usual performance that can be achieved:
- Normally on very porous substrates, 300 to 600 g/m2 per coat.
- Normally on substrates with very low porosity, 50 to 200 g/m2per coat.
- 5L carafe
- Carafe of 5L
Grade Comments (0)