Diamond Polishing Block 200 grit Rubi 61976

Rubber diamond cues RUBI are semi-flexible and their EVA rubber body allows an excellent adaptation to the user's hand. The grip area features a lateral indentation that increases the ergonomics of the block and reduces hand fatigue during use.


The diamond rubber blocks have been designed for manual work on areas where access with power tools is very difficult, such as interior angles, hollow areas or corners, and for roughing and smoothing chipped or sharp edges.

To achieve a good result, both the type of material and its condition must be taken into account.

RUBI diamond rubber pads can be used dry, but wet use is recommended, either by wetting the pad or by providing a continuous cooling source.

The RUBI range of diamond rubber pads is available in different grain sizes to perform different polishing and finishing jobs. It is very important that, in polishing work, a staggered degradation is carried out using the different grits in succession.

In roughing and/or edge smoothing work, the movement of the block should always go from the top (the most visible) to the bottom. This reduces the risk of chipping or damaging the material.

The functions of the different grits are:

#60, #120 and #200 for roughing.

#400 for polishing.

For a better finish, it is necessary to be more insistent with the larger grits.

The dimensions of the diamond plate of the rubber polishing pads are 55x90 mm.

The dimensions of the rubber pad are 58x94x30 mm.

CARACTERISTICS

• Semiflexible. Good adaptation to the user's hand.
• It is recommended for use in wet conditions.
• Dimensions of the diamond plate: 55x90 mm.
• Dimensions of the diamond plate: 55x90 mm.
• Rubber block dimensions: 58x94x30 mm.
• Rubber block dimensions: 58x94x30 mm.
• Rubber block dimensions: 58x94x30 mm.
• Range of diamond rubber pads for grinding and polishing of edges, cuts and surfaces of natural stone and ceramic tile.