Manual cutter SLAB CUTTER G3 Rubi

SLAB CUTTER G3 manual cutting system allows to make precious cuts in large format porcelain tile.

Its G3 guides are made of aluminum to provide an extra weight reduction of the whole tool. Its exclusive design prevents the carriage from unintentionally sliding out of the G3 guides and improves the fixing system between guides thanks to its coupling system. Each SLAB CUTTER G3 includes 3 G3 slides that allow you to make cuts on workpieces up to 320 cm. This capacity can be increased by 110 cm for each G3 guide incorporated.

Each G3 guide includes two suction cups. These suction cups have an "anti-marking" rubber base that allows working on light-colored materials without the risk of staining them. The G3 guide system is compatible only and exclusively with products such as G3.

The carriage is very light as it is made of aluminum and provides greater marking power. Its movement along the G3 guides is very smooth and precise, due to its three horizontal bearings. The sort-grip handle provides power and comfort for the user.

The carriage is equipped with a Ø22 mm EXTREME roller, suitable for working on materials with surface, rough and structured finishes, without abandoning, of course, materials with smooth or polished finishes.

In addition, it includes a SLAB tongs capable of separating materials up to 10 mm thick. The SLAB pliers have a dual function: pliers for materials up to 6 mm thick and a screw clamp for materials up to 10 mm thick. The design, and dual function, of the SLAB pliers allows the separation to be carried out with minimum effort by the user.

To complete the equipment and facilitate transport and storage, the SLAB CUTTER G3 includes a practical textile bag, reinforced and equipped with compartments for storing and securing all the components of the SLAB CUTTER G3.