Rubi XL Hole Marker 70953

Copies and transports the position of holes for pipes and electrical boxes from the wall to the ceramic for subsequent cutting or drilling. Maximum length 65 cm.

.

This simple tool copies and transports, in a quick, simple and precise way, the position of the holes for pipes, water or light connections, electrical boxes, or any other element that the professional tile installer will find during the installation process of the tile, from the wall to the ceramic, for its subsequent cutting or drilling.

The maximum length 65 cm of the hole marker is the maximum radius of action, from the reference corner.

The operation of the RUBI hole marker is very simple. We must have placed at least 3 of the perimeter tiles to the hole to be marked. Placing the triangular piece of the marker in the corner formed by the tiles already installed, we will look for the exact point of the hole with the circular or square templates, and then tighten the screw and lock the position found.

Subsequently we transport this measurement to a new tile, placing the triangular piece in the same corner from which we had taken the reference.

Finally we only have to copy the hole position using the corresponding template.