Set of 11 open end wrenches and ring wrench 6003 Joker Wera 020231

Because of the fact that assembly spaces are getting tighter and tighter in bolting work, it is necessary for users to have tools with which they can also work successfully in these situations. In tight environments, additional points are needed at which the tool can be repositioned, so is it possible to modify the open-end wrenches in such a way as to increase the repositioning possibilities of the tool? Through the combination of the 7.5° turned jaws and the double hexagon geometry, a doubling of the tool positioning points when screwing in is achieved.

When the wrench is turned by 7.5°, the tool can be repositioned to the desired position.

By repeatedly turning the wrench through 180° along its longitudinal axis during the screwing action, four possibilities are given, and thus nuts and bolts can be actuated every 15°. In this way, the Joker 6003 with its ingenious jaw geometry expands the spectrum of applications in tight spaces significantly.

The Joker 6003 practically finds the corresponding positioning point autonomously after every rotation of the tool. The annular side is slim but nevertheless very robust and is bent at an angle of 15° to the tool axis.

The Joker 6003 has a very robust, slim annular side and is bent at an angle of 15° to the tool axis.

The high-quality surface finish ensures effective and long-lasting corrosion protection. It carries the "Take it easy" tool finder system: with colored markings according to size.

The Joker bags have a self-adhesive bonding system on the back side for easy attachment to the wall, shelf or tool trolley in the workshop, or for connection to the Wera 2go transport system.

Features

.

• Specially suitable for very narrow mounting spaces.
• The special geometry of the jaws extends the positioning possibilities of the tool
• Minimum return angle inside the jaws "grips" the screw every 15°
• Minimum return angle inside the jaws "grips" the screw every 15°
• The annular side is thin and bent at an angle of 15°
• Suitable for connection to the Wera 2go system

INCLUDES

.

• x1 8x115 mm
  .
• x1 10x125 mm
• x1 10x125 mm
• x1 11x135 mm