The SLAB TRANS HEAVY DUTY conveyor is specially designed for the handling of ceramic sheets and large format tiles up to 320 cm in length.
The SLAB TRANS HEAVY DUTY can be used as a complement to the SLIM CUTTER and KIT TC-125 cutting systems.
It consists of a set of two extruded aluminum profiles, reinforced, retractable and adjustable from 165 to 320 cm, and two perpendicular crossbars that favor the robustness and stability of the whole assembly, especially during the handling of the heaviest pieces.
Thanks to the 6 vacuum suction cups, the installer can adjust the fixing points, ensuring the handling of the porcelain sheets.
For a correct fixing of the system, we must check that the surface of the sheet is clean of dust or other residues.
The set has 4 handles (2 per guide) that can be adjusted and positioned along the entire length of the guide, facilitating and adapting the SLAB TRANS HEAVY DUTY to each moment and format.
The SLAB TRANS HEAVY DUTY conveyor has been designed mainly for handling ceramic sheets with thicknesses of 6 mm or more. These materials, in addition to being a challenge due to their volume (surface area), are very heavy compared to the 3 or 5 mm sheets we have been used to up to now. The design of the aluminum profiles of the SLAB TRANS HEAVY DUTY gives it a maximum load capacity of up to 140 kg.
It is important to note that this load capacity is total, so it can not be exceeded in any case.
When talking about such high weights, and always taking into account that the handling must add the weight of the conveyor itself, the fact of not exceeding the maximum single person load must be considered. Therefore, in some cases, 3 or 4 operators will be necessary to ensure safe handling.
MATERIALS
Ceramic sheet and large-format ceramic tiles.
USES
Conveyor/rack for handling ceramic sheet.
Carrier/rack for handling ceramic sheet.
Features
Features
.
- Set of 2 retractable profiles (from 165 to 320 cm) made of reinforced aluminum.
- Set of 2 retractable profiles (from 165 to 320 cm) made of reinforced aluminum.
- 6 vacuum suction cups Ø20 cm, for any type of surface (3 per profile).
- Equipped with a set of perpendicular crossbars for greater stability.
Grade Comments (0)