Gardena Automatic Irrigation System for Planters 1407-20

Independent of the water tap, the automatic watering of planters can be operated from a rainwater tank for example.

Independent of the water tap the automatic watering of planters can be operated from a rainwater tank for example.

Independent of the water tap.

Extensible system, if you need to connect more than 6m of planters. To save water, there is the possibility of connecting it to the electronic rain sensor, ref. 1189 or the humidity sensor, ref. 1188.

This kit includes: a transformer with timer to select the watering program, a 14 V low voltage pump with dirt filter, 25 linear drippers of approx. 2 l/h with 1 closing cap, 10 m of distribution tube 4.6 mm (3/16"), 15 tube holders.

CARACTERISTICS

.

• Fully automatic: The watering of the planters can be regulated by the programmer and the water flow is automatically switched on or off. This system is very practical and gives you more free time.
• Watering according to needs:The wide selection of 14 watering programs allows you to water optimally, depending on the requirements of your plants.
• Top product quality: GARDENA products made in Germany are high quality and high performance, reliable and with continuous innovation.
• Independent of the water supply: The automatic watering system for planters works independently of the tap, wherever there is a water reserve, such as a rainwater tank and where there is a power supply.
• The automatic watering system for planters works independently of the tap, wherever there is a water supply, such as a rainwater tank and where there is a power supply.
• Ready to use immediately:Thanks to the complete programming set with pump included, this system can be used immediately.

Article number: 1407-20

INCLUDES

• Transformer
• Pump
• 25 linear drippers approx. 2l/h with 1 stopper cap
• Pump.
• 10 m of 4.6 mm (3/16") distribution tubing
• 10 m of 4.6 mm (3/16")distribution tubing
• 15 pipe holders