Fila HYDROREP water-repellent protection bottle

Provides water-repellent protection without altering the appearance of the material.

Ideal for exterior stone and cement walls.

Protects the joints

Protects against atmospheric agents by preventing the formation and incrustation of mold, moss, verdigris, oxidation, etc.

ADVANTAGES

• Provides breathable, long-lasting and recoverable protection
• It does not alter the aesthetics: It does not change the tone, color or texture of the material
• Does not yellow in any environmental and aging conditions
• High penetration capacity: ideal for materials with low absorption
• Very high performance
• Prevents the formation and encrustation of verdigris
• Anti-efflorescence: Prevents the escape of salt from the material

IDEAL FOR

• Unpolished Marble and Granite
• Unpolished Stone and Terrazzo
• Cement And Derivatives
• Artificial stone

HOW TO USE

Does not dilute : ready to use.

Application:

With a clean and dry surface, apply the product with a brush evenly and in two coats at a distance of 8 hours. Apply a single coat of product on poorly absorbent stones (e.g. slate). To achieve hydro-oleorepellent protection, apply a coat of FOB XTREME instead of the second coat of HYDROREP. The surface is passable after 4 hours. The water-repellent protection is active after 24 hours. FOR PROFESSIONAL USE ONLY

ATTENTION ! On low absorption natural stone, test the product on a small part of the surface to check that no color changes occur. Do not apply the product if rain is expected. Does not protect against acid attacks.

PERFORMANCE

APPROXIMATE YIELD (1 liter):

Natural stone: 10/20 m²

Cement and derivatives: 5 m²

FORMATS

1 L jar

5 L jar