5kg can Ready-to-Use Glass Ready Glazing Putty Algíss

• Ready to open and use.
• Easy sanding
• Fine finish, ready to paint
• Fine finish, ready to paint.
• Thin or thick coat application
• Thin or thick coat application
• Multipurpose: Thin coat application on plaster, smooth paint, stippled paint, plasterboard, concrete, brick, etc.
• Multipurpose: Thin coat application on plaster, smooth paint, stippled paint, gypsum board, concrete, brick, etc.
• Drying between 12h and 24 h
• Time of use: 24 hours (in closed bucket)
• Storage:Store the cans in a dry and covered place, protected from frost and direct sun exposure.
• Fine and white putty and with granulometry less than 300 μ (fine)
  .
• Yield: 1.2Kg / m², / mm.
• Reaction to fire: A2 -s1,d0
• Presentation: 1kg or 5kg

MODE OF EMPLOYMENT

.

• To ensure proper adhesion of the product and avoid future peeling, the substrates must be dry and free of dust, grease and/or waxes
  .
• In case of surfaces with poorly adhered paint, remove it until a clean and sanitized support is achieved. If there are cracks or imperfections of great thickness on the surface to be treated, it is recommended to apply Cristal Repair to fill them and thus obtain a sanitized support ready to work on it
• Apply the necessary coats between 1-2mm thick in cross coats, before applying the second coat let the previous one dry. The drying time between coats will be between 12 and 24 hours depending on thickness
• Apply between 5 and 40 ºC