Mapegrout SV 25 kg Mapei mortar bag

Mapegrout SV is a single-component premixed mortar in powder form, composed of specific hydraulic binders, high-strength cements, selected aggregates and special additives, according to a formula developed in MAPEI's Research Laboratories. By appropriately varying the amount of water, Mapegrout SV acquires a fluid or superfluid consistency, which makes the mortar suitable to be poured, even in high thicknesses (up to 5 cm), without risk of segregation, in a defined enclosure or formwork.

CARACTERISTICS

• For thicknesses greater than 5 cm, Mapegrout SV should be mixed with 40% of Mortar Gravel 6/10. Thanks to its rapid hardening Mapegrout SV is passable, even for wheeled vehicles, about 2 hours after application, at a temperature of +20° C.
• Its particular composition and the special additives it contains give the mortar high mechanical performance, even in the long term, impermeability to water and high resistance to abrasion.
• Mapegrout SV complies with the requirements of EN 1504-9 ("Products and systems for the protection and repair of concrete structures - Definitions, requirements, quality control and conformity assessment - General principles for the use of products and systems") and the minimum requirements established by EN 1504-3 ("Structural and non-structural repair") for structural mortars of class R4

AM IMPORTANT NOTICES

• Do not add cement or additives to Mapegrout SV.
• Do not use Mapegrout SV if the bag is damaged.
• Do not add water when the mixture has started to set
• Do not add water when the mixture has started to set.
• Do not apply Mapegrout SV on asphalt or bitumen-treated surfaces
• Do not apply Mapegrout SV on asphalt or bitumen-treated surfaces.
• Do not apply Mapegrout SV on smooth surfaces. Roughen the substrate (roughness not less than 5 mm) and, if necessary, add a contrasting reinforcement
• Do not apply Mapegrout SV on smooth surfaces.
• Do not use Mapegrout SV when the temperature is below +5° C. If the product has to be used at temperatures other than those indicated, please consult our Technical Assistance Service
• Do not use Mapegrout SV at temperatures below +5°C.
• Mapegrout SV hardens very quickly; it is therefore recommended to mix quantities of product that can be placed on site within 15 minutes of preparation.

APPLICATION FIELDS

.

• Repair of heavily degraded concrete structures requiring the use of flowable mortars.
• Repair of industrial pavements, road works or airports, which need to be reopened to traffic in a short space of time.
• Quick fixation of manholes and manhole covers.

Some examples of applications

• Repair of concrete pavements for industrial use, shopping centers and warehouses
• Repair of concrete pavements for industrial use, shopping centers and warehouses
• Repair of concrete airport pavements.
• Repair of concrete sidewalks
• Fixing of road signs
• Fixing of road signs.
• Fixing of concrete poles for electrical or telephone lines
• Fixing of concrete poles for electrical or telephone lines
• Fixing of fences
• Fixing of fences
• Fixing of urban furniture
• Fixing of street furniture
• Fastening of rail guards and protective barriers
• Fixing of rail guards and guardrails
• Fixing of rail guards and protective barriers
• Fixing of manhole covers and manholes of gas, electric or telephone companies
• Fixing of manhole covers and manholes of gas, electric or telephone companies

.

CONSUMPTION

.

Purely used: 20 kg/m², per cm thickness. Utilized mixed:14.5 kg/m², per cm thickness (5.7 kg/m², of Gravel for Mortar 6/10)

COLOR

Grey and black

PRESENTATION

• Bag of 25 kg