Repair Mortar Idrosilex Pronto RPG Mapei 25 kg

Mapei's Idrosilex Pronto RPG is a cementitious, osmotic and fibre-reinforced plaster of medium granulometry for the repair, conservation and maintenance of concrete, stone or masonry structures.

CARACTERISTICS

• Idrosilex Pronto RPG is a premixed powder mortar based on cement, selected aggregates with medium granulometry, special fibers, synthetic resins and hydrophobic additives according to a formula developed in MAPEI's Research and Development Laboratories.
• Idrosilex Pronto RPG is a powdered premixed mortar based on cement, selected aggregates with medium granulometry, special fibers, synthetic resins and hydrophobic additives according to a formula developed in MAPEI's Research and Development Laboratories.
• Idrosilex Pronto RPG, mixed with water, provides a surface finishing mortar with a thixotropic consistency, which can be applied by spraying or brushing, in
• thicknesses between 4 and 18 mm, characterized by a high level of waterproofing and high adhesion to the substrate.
• Idrosilex Pronto RPG complies with the principles defined in EN 1504-9 ("Products and systems for protecting and repairing concrete structures: definitions, requirements, quality control and conformity assessment. General principles for the use and application of systems") and the minimum requirements of EN 1504-3 ("Structural and non-structural repairs") for structural mortars class R3.

RECOMMENDATIONS

Recommendations

.

- Idrosilex Pronto RPG is a ready-to-use premixed product. Therefore, no cement, aggregates or additives should be added.
- Do not use on flexible surfaces.
- Do not apply Idrosilex Pronto RPG when there is standing water in the substrate.
- Do not dilute Idrosilex Pronto RPG with greater than recommended amounts of water.

.

APPLICATION

.

Once the substrate and mixture have been properly prepared, apply the mixture with a trowel or rendering machine. Idrosilex Pronto RPG can be applied in layers from 4 to 18 mm thick. Idrosilex Pronto RPG maintains its workability for approximately 1 hour at + 20 ° C. If work is interrupted for prolonged periods, we recommend cleaning the tubes and all work tools.

CONSOLUTION.

CONSUMPTION

.

1.8 kg / m², per mm thickness.

COLOR

Gray

PRESENTATION

Bag of 25kg