Adhesive Sealant Cartridge 290ml Fischer MS Ultra Tack

Permanent elasticity adhesive and sealant based on SMP. 1-component system with excellent fast drying with high initial tack and high strength.

ADVANTAGES

.

• Fast drying even at low temperatures.
• High initial tack
• High initial adhesion
• High final strength.
• High ultimate strength
• High initial tack
• Easy to process
• Easy to process
• Solvent-free.
• No solvents, isocyanates or silicones
• No solvents, isocyanates or silicones
• Wide adhesion range
• Odry odorless.
• Odorless
• Paint compatible
• Compatible with paints
• Little resistant up to +200°C for dust and heat
• Slightly resistant up to +200°C for dust and heat.
• Barnishable
• Adjustable
• Permanent elasticity from - 40°C to + 90°C
• Very good sealing properties
• Highly resistant to corrosion.
• Non-corrosive on surfaces
• Non corrosive on surfaces
• Resistant to shocks and vibrations

APPPLICATIONS

Immediate and flexible bonding adhesive in metals, apparatus and machine construction, plastics technology, air conditioning and ventilation systems, car bodies, wagons, and in container construction. Thanks to rapid drying, parts can be bonded in a continuous working process. The neutral polymerization allows bonding without the need for thermal bonding or chemical pretreatment of the assembly parts

.

CONSTRUCTION MATERIALS

.

• Metals, powder coated and varnished.
• Galvanized, anodized, chrome-plated or hot-dip galvanized surfaces
• Various plastics
• Ceramics
• Stone
• Concrete
• Ceramic
• Wood
• Wood.
• Wood

* Detailed information on construction materials can be found in the registration document.

* Detailed information on construction materials can be found in the registration document.

FUNCTIONALITY

.

• Can be applied directly from the cartridge using a suitable Silicone Gun (manual, air, battery).
• Can be applied directly from the cartridge using a suitable Silicone Gun (manual, air, battery).
• Cut the nozzle tip according to the joint width.
• V-nozzles are recommended for bonding applications.
• Depending on the bonding surface, material expansion, stress and mechanical stresses with a layer thickness of 1 - 6mm.
• It can be applied with an automatic dispensing equipment.
• For vapor permeable substrates, the material can be applied over a large area using a notched trowel.
• The bond should be in place at the joint.
• Bonding must take place within the processing time.
• Bonding must take place within the processing time.
• Bonding must take place within the processing time.
• Unhardened adhesive can be removed with rubbing alcohol or isopropyl alcohol.
• Dry adhesive can be removed with rubbing alcohol or isopropyl alcohol.
• Dry adhesive can be removed with rubbing alcohol.
• Dried adhesive can be removed mechanically only.