Fischer MS Ultra Fast 290ml Adhesive Sealant Cartridge

Permanent elasticity adhesive and sealant based on SMP. 1-component system with excellent and fast crosslinking and high strength

CARACTERISTICS

• Fast crosslinking even at low temperatures.
• High ultimate strength
• High final strength
• High final strength.
• Easy to process
• Simple processing
• No solvents, isocyanates or silicones
• No solvents, isocyanates or silicones
• Wide adhesion range
• Odry odorless.
• Odorless
• Neutral chemical polymerization
• Neutral chemical polymerization
• Paint compatible
• Compatible with paints
• Little resistant up to +200°C for dust and heat
• Barnishable
• Adjustable
• Permanent elasticity from - 40°C to + 90°C
• Very good sealing properties
• Highly corrosion resistant.
• Non-corrosive on surfaces
• Non corrosive on surfaces
• Resistant to shocks and vibrations

APPLICATIONS

.

• Flexible application in the areas of metal, apparatus and machine construction, plastics technology, air conditioning and ventilation, car body, wagon, vehicle and container construction.
• Thanks to the fast curing it is possible to join the parts in one piece in a continuous working process. The neutral polymerization allows a connection without thermal or chemical pretreatment of the assembly parts

CONSTRUCTION MATERIALS

.

• Metals, metallic coating.
• Barnished
• Galvanized, anodized, chrome-plated or hot-dip galvanized surfaces
• Diverse plastics
• Ceramics
• Stone
• Concrete
• Ceramic
• Wood
• Wood.
• Wood

* Detailed information on construction materials can be found in the registration document.

* Detailed information on construction materials can be found in the registration document.

FUNCTIONALITY

.

• Can be applied directly from the cartridge using a suitable Silicone Gun (manual, air, battery).
• Can be applied directly from the cartridge using a suitable Silicone Gun (manual, air, battery).
• Cut the nozzle tip according to the joint width.
• V-nozzles are recommended for bonding applications.
• Depending on the bonding surface, material expansion, stress and mechanical stresses with a layer thickness of 1 - 6mm.
• It can be applied with an automatic dispensing equipment.
• For vapor permeable substrates, the material can be applied over a large area using a notched trowel.
• The bond should be in place at the joint.
• Bonding must take place within the processing time.
• Bonding must take place within the processing time.
• Bonding must take place within the processing time.
• Unhardened adhesive can be removed with rubbing alcohol or isopropyl alcohol.
• Dry adhesive can be removed with rubbing alcohol or isopropyl alcohol.
• Dry adhesive can be removed with rubbing alcohol.
• Dried adhesive can be removed mechanically only.