- On sale!
- -26.8%
Mounting adhesive with Xtra Grip Technology that provides TOTAL IMMEDIATE GRIP to fix in a RESISTANT and EASY way. Maximum versatility ALL* materials: porous and non-porous, even delicate and wet surfaces. Indoor and outdoor.
*Not suitable for polyethylene (PE), polypropylene (PP), PTFE.
CARACTERISTICS
Final strength: 400kg/10cm²,. Immediate Full Grip - 10 seconds Excellent adhesion. High filling capacity. Interior-Exterior. Permanent bonding. Humidity and temperature resistant between -15ºC and +80ºC. No sagging Specially for vertical applicationsAPPLICATIONS
Panels, sheets, cladding and veneers . Skirting, baseboards, moldings, moldings, transoms, profiles. Electrical boxes or boxes, sockets, switches. Hangers, soap dishes, handles and accessories in general. Door and window frames. Signage signs and decorative panels.MATERIALS
*Except polyethylene (PE), polypropylene (PP) and PTFE.
METHOD OF USE
.
CLEAN and dry thoroughly the surfaces to be bonded
CUT the surface to be bonded.
CUT the cannula and APPLY Montack Immediate Total Bonding by pressing and in abundance, by dots or beads, on one of the surfaces to be joined.
JOIN the pieces moving them slightly to settle the adhesive well and PRESS hard for a few seconds.
Tips:
For gluing heavy objects, secure the joint physically, using tape or clamps, until the adhesive cures completely.
Do not wait more than 5 minutes between application of the product and bonding.
Wait no more than 5 minutes between application of the product and bonding.
The maximum resistance is reached 24 hours after its application (72 hours in the case of joints in non-porous substrates, in thick layer or in areas of low ventilation). Do not subject the product to stress until this time has elapsed.
Storage and application temperature: +5ºC to +30ºC.
Storage and application temperature: +5ºC to +30ºC.
Grade Comments (0)