Column drill 500W TC-BD 500 Einhell

The TC-BD 500 pillar drill from Einhell is a precision tool for high demands: Thanks to the 115 mm overhang, it is possible to drill precise holes in large wood or metal parts reliably. With 500 watts of power and 9 speeds from 300 to 2410 rpm, precise and material-specific drilling is achieved.

The pillar drill can be used at both very low and very high speeds and is therefore excellent for hard (metal) and soft (wood) materials. Precise drilling is possible thanks to the adjustable depth stop. The maximum drilling depth is 50 millimeters.

It has a robust girth gear chuck and MK2 holder, which allows the use of Morse taper drills and conventional drills with a diameter between 1.5 mm and 13 mm. The ball-bearing spindle ensures long-lasting and smooth operation. The drill press can be variably adjusted thanks to the infinitely variable height adjustment of the drilling table.

The drilling table can be rotated up to 90° and tilted up to 45°. The rubber-coated three-arm crank handle proves its efficiency thanks to the leverage effect, exerting precise pressure without excessive force. The hinged chip guard ensures safety during use and the on/off switch with zero voltage trip prevents the machine from restarting unintentionally after a power failure.

CHARACTERISTICS

• 9 speed settings suitable for every material
• For the most common drill sizes thanks to the girth gear chuck
• Precise and fast drilling thanks to adjustable depth stop
• Variable due to infinitely variable drill table height adjustment
• Drilling table additionally rotatable and tiltable
• Three-arm crank handle with rubber coating for precise pressure
• Safe working due to hinged chip guard
• On/off switch with zero voltage trip
• Ball bearing spindle for ease of operation and increased durability

SPECIFICATIONS

• Mains supply: 230-240 V | 50 Hz
• Power: 350 W
• Max. power (S6 | S6%): 500 W | 40
• Idling speed: 300 min^-1 - 2410 min^-1
• Number of speed steps: 9 levels
• Tilting drill table: 45 ° - 45 °
• Drill chuck mounting: B16
• Drilling diameter: 1.5 mm - 13 mm
• Neck: 115 mm