Column drill TC-BD 450 E 450W Einhell

The pillar drill TC-BD 450 E is a practical and precise machine for high demands, thanks to the 104 mm overhang, it is possible to drill precise holes in large pieces of wood or metal reliably.

With 450 watts of power and 5 speeds from 600 to 2650 rpm, precise and material-specific drilling is achieved. It can be used at both very low and very high speeds and is therefore excellent for hard (metal) and white (wood) materials. 

It has an adjustable depth stop for precise drilling. The maximum drilling depth is 50 mm. It has a robust girth gear chuck and MK2 holder, which allows the use of Morse taper drills and conventional drills with a diameter between 1.5 mm and 13 mm. Thanks to the pocket-bearing spindle, it ensures long-lasting and smooth operation.

The drill press can be variably adjusted thanks to the infinitely variable height adjustment of the drilling table. In addition, the drilling table can be rotated by up to 90° and tilted by up to 45°. The rubber-coated three-arm crank handle proves its worth thanks to the leverage effect, exerting precise pressure without excessive force.

The hinged chip guard ensures safety during use and the on/off switch with zero voltage trip prevents the machine from restarting unintentionally after a power failure.

FEATURES

• 5 speed settings suitable for every material
• For the most common drill sizes thanks to the girth gear chuck
• Precise and fast drilling thanks to adjustable depth stop
• Variable due to infinitely variable drill table height adjustment
• Drilling table additionally rotatable and tiltable
• Three-arm crank handle with rubber coating for precise pressure
• Safe working due to hinged chip guard
• On/off switch with zero voltage trip
• Ball bearing spindle for ease of operation and increased durability

SPECIFICATIONS

• Mains supply: 230-240 V | 50 Hz
• Power: 300 W
• Max. power (S6 | S6%): 450 W | 20
• Idle speed: 600 min^-1 - 2650 min^-1
• Number of speed steps: 5 levels
• Tilting drill table: 45° - 45° - 45° Drill table tilting: 45° - 45° - 45° - 45° - 45° - 45° - 45
• Drill chuck mounting: B16
• Drilling diameter: 1.5 mm - 13 mm
• Neck: 104 mm