Rubi TR-710 Magnet Manual Cutter

The TR-MAGNET manual cutters allow an intensive cutting of ceramic tile, especially when we refer to tile (type BIII) and stoneware (type BIIa), but they also offer us an optimal performance in the frequent cutting of porcelain stoneware tiles (type BIa) with thicknesses less than 15 mm.


The multi-point separator of RUBI's TR-MAGNET manual cutters guarantees perfect cutting quality in the execution of diagonal cuts from end to end.

On the other hand, the TR-MAGNET machines stand out for the system with which the separator assembly is equipped, allowing the operator to work with only one hand.

The MAGNET system locks the separator, facilitating an easier and more visible scratching of the ceramic tile. On the other hand, by simply moving the lever upwards, we arm the spreader that will allow us to apply the 800 kg of maximum power and obtain clean and precise cuts.

All models in the TR-MAGNET range of manual cutters have a rotating square with central pivot, for quick and accurate measurement of angular cuts, within the range of -45º to 0º to 45º. The square is completed with a side stop, made of technical plastic, which allows the fixing of the pieces in repetitive cuts.

RUBI's TR-MAGNET manual cutters have a high-strength aluminum base and a two-layer system with damping effect, and side supports for large format tiles.

The TR-MAGNET manual cutters are equipped with chromed steel guides, rectified and calibrated, with anti-corrosion treatment. This double guide system offers the user a better and better visibility of the scoring line, thus obtaining a high precision in all the cuts.

The possibility of using the whole range of RUBI interchangeable rollers from Ø 6 to 22 mm,

The TR-MAGNET manual cutters can be adapted to each ceramic material and obtain maximum cutting performance and quality.

The TR-MAGNET manual cutters include, as standard, two rollers: one Ø 6 mm for cutting tiles and the other Ø 10 mm for glazed stoneware. Finally, we would like to highlight one of the most characteristic and characteristic aspects of RUBI hand-held cutters: the transport case, with reinforced locks and hinges, to protect and facilitate the mobility of our TR-MAGNET hand-held cutters.

In the process of creating our tools, we include a period of testing in real working situations in certain national and international markets, carried out by a group of trusted professionals in the sector. This action allows us to detect areas for improvement in our products before they are released for sale and/or adapted to the needs of the end user.