Your cart
There are no more items in your cart
Rubi TR-710 Magnet Manual Cutter + 200 grit Diamond Polishing Block
€483.43
Tax included
When we talk about TR-MAGNET manual cutters, we highlight their movable separator. Thanks to the mobile separator, TR-MAGNET manual cutters are ideal for diagonal cutting. Cuts that can also be made with great precision thanks to its rotating square. Read more
The TR-MAGNET manual cutters allow an intensive cutting of ceramic tiles, especially when we refer to tile (type BIII) and stoneware (type BIIa), but they also offer us an optimal performance in the frequent cutting of porcelain stoneware tiles (type BIa) with thicknesses less than 15 mm.
The MAGNET system locks the separator, facilitating easier and more visible scratching of the ceramic tile. On the other hand, by simply moving the lever upwards, we arm the spreader that will allow us to apply the 800 kg of maximum power and obtain clean and precise cuts.
All models in the TR-MAGNET range of manual cutters have a rotating square with central pivot, for quick and accurate measurement of angular cuts, within the range of -45º to 0º to 45º. The square is completed with a side stop, made of technical plastic, which allows the fixing of the pieces in repetitive cuts.
RUBI's TR-MAGNET manual cutters have a high-strength aluminum base and a two-layer system with damping effect, and side supports for large format tiles.
The TR-MAGNET manual cutters are equipped with chromed steel guides, rectified and calibrated, with anti-corrosion treatment. This double guide system offers the user a better and better visibility of the scoring line, thus obtaining a high precision in all the cuts.
The possibility of using the whole range of RUBI interchangeable rollers from Ø 6 to 22 mm,
The TR-MAGNET manual cutters can be adapted to each ceramic material and obtain maximum cutting performance and quality.
The TR-MAGNET manual cutters include, as standard, two rollers: one Ø 6 mm for cutting tiles and the other Ø 10 mm for glazed stoneware. Finally, we would like to highlight one of the most characteristic and characteristic aspects of RUBI hand-held cutters: the transport case, with reinforced latches and hinges, to protect and facilitate the mobility of our TR-MAGNET hand-held cutters.
Features
Features
Features
Features
Fast magnet operating system, operable with one hand. Easier and faster cutting Reinforced construction elements. Increased separation power Stronger cutting power Stronger cutting power. Revolving square with central pivot for quick and accurate measurement of angular cuts High visibility during the cutting process. High visibility during scoring High visibility during scoring.MATERIALS
- For the frequent cutting of porcelain stoneware and intensive cutting of glazed stoneware and tile.
CARACTERISTICS
- Base supplement for large formats.
- With Ø 6 and 10 mm. impellers and carrying case
- With Ø 6 and 10 mm. impellers and carrying case
- With Ø 6 and 10 mm. impellers included.
- Interchangeable rollers from Ø 6 to 22 mm
- Two-layer base with shock absorbing effect
- High-strength aluminum base
- High-strength aluminum base
- High-strength aluminum base
- Steel guides, solid, Ø 20 mm. Chrome-plated and ground, with anti-corrosion treatment, for greater resistance to torsion
- Chromed and ground, with anti-corrosion treatment, for greater resistance to torsion.
- Multipoint separator of 800 kg. of power.
- Reinforced handle with SOFT-GRIP grip
- Side stop for repetitive cutting
- Side stop for repetitive cuts
SPECIFICATIONS
.
- Cutting length - 71 cm.
- Diagonal cut length - 50x50 cm.
- Cutting height - 3-15 mm
Spreader power - 800 kg With carrying case - YES
Features Diamond polished block 200 grit
.
- Semiflexible. Good adaptation to the user's hand.
- Recommended for wet use.
- Dimensions of diamond plate: 55x90 mm
- Rubber cue pad dimensions: 58x94x30 mm
- Range of diamond rubber plugs for grinding and polishing of edges, cuts and surfaces of natural stone and ceramic tile
195083
2 Items
Tap to zoom
Grade Comments (0)