Fila INSTANT REMOVER Instant Cleaner Spray for Fresh Cement Joint 750ml

Ideal for cleaning the back of large format pieces before placement.

Ideal for cleaning grouting tools after use.

Prevents the formation of "opaque veil" due to lack of complete removal of grout residue.

ADVANTAGES

• Rapid DRY Technology: With fast action and drying, to be used in the grouting phase
• Does not create foam and does not need to be rinsed
• Safe for the user and the environment
• Respect the material and joints
• High performance
• Does not damage aluminum and steel profiles
• Does not emit toxic gases
• For interiors and exteriors, floors and coverings
• Patented product: application system with effective and certified final result

IDEAL FOR

• Porcelain stoneware
• Ceramics
• Vitreous Mosaic
• Extruded Stoneware

HOW TO USE

Does not dilute: ready to use.

Application:

Once grouting, wait for the joint mortar to appear dense and the surface gloss to disappear, according to the times indicated by the manufacturer (normally between 10 and 30 minutes). Proceed with a first cleaning of the tiles with a soft damp sponge. Then carry out the final finishing cleaning: spray INSTANT REMOVER on the surface evenly. Leave it on for 1-2 minutes (depending on the type of finish of the material) and wipe it with a microfiber cloth or a soft, very wrung sponge, rinsing it often to keep it clean. In the case of highly embedded waste, repeat the operation after an hour. To put it into use, follow the instructions of the gasket material manufacturer.

ATTENTION ! Do not use on polished marble and on all materials sensitive to acids. Carry out a preliminary test to determine the resistance of the joint to the product over a small surface area. For aluminum elements, use the product according to the instructions for use. Avoid using abrasive sponges and scouring pads. Do not apply high pressure during the cleaning phase.

PERFORMANCE

indicative for 750 ml

Large format pieces: Up to 350 linear meters

Vitreous mosaic: up to 15 m²