Protective Wax Bottle with Shine Effect 1L Fila LONGLIFE

Perfect on resinous type flooring (rubber, PVC,…)

Ideal for surfaces in rustic natural stone (slate, granite, etc.), clay and extruded stoneware.

Also optimal for the maintenance of quartz-cement floors treated with BETON.

Creates a polymeric film with high protection and shine.

Ideal for protecting pavements in public environments.

ADVANTAGES

• Provides a shiny effect without the need to polish
• Great adhesion capacity and high self-leveling power
• easy to apply
• High concentration: it can be used both pure (in the treatment phase) and diluted in water (in the maintenance phase)
• Maintenance can be carried out with a high speed rotary machine.
• Non-slip finish (ISO 10545-17 STANDARD ANNEX A, BCRA METHOD)

IDEAL FOR

• Mud
• Extruded Stoneware
• Board
• Natural Stone and Terrazzo
• Rubber and PVC
• Plastic Laminates
• Linoleum
• Resin
• Vinyl

HOW TO USE

To protect floors: With a clean and dry surface, apply LONGLIFE with a brush or other similar applicator evenly. Wait until completely dry (at least 1 hour) and apply a second coat. Wait for complete drying before transiting. It does not shine.

On clay and porous stone pavements, it is necessary to previously apply a waterproofing base to be chosen according to the material and the desired shade (e.g. W68, FOB XTREME, WETECO). Wait 24 hours before applying LONGLIFE.

For maintenance: Renewal of shine (e.g. every 2/3 months): with a clean surface, apply LONGLIFE diluted in water in a 1:10 ratio (500 ml. in 5 liters of water) with a cloth or other similar applicator. Wait for complete drying before transiting. Recovery of protection (e.g. once a year): with a clean and dry surface (if necessary, remove old layers of wax with PS87 PRO) apply pure LONGLIFE with a cloth or other similar applicator. Wait for complete drying before transiting.

ATTENTION ! Do not walk on the floor while it is drying and do not go over the spots that have already been treated and have not yet dried. It is possible to remove the product using PS87 PRO stripping detergent. Do not apply on exterior surfaces and in humid environments (e.g. showers). The product slightly revives the tone of the materials, carry out a test beforehand on a small area of the surface.

PERFORMANCE

With one liter of product you can treat:

Mud: 30 m²

Stone: 30/40 m²

Rubber/PVC, plastic laminates, linoleum, resin (pure): 30 m²