Protective Wax Bottle with Matte Effect 1L Fila MATT

Ideal as a finishing treatment for water-based waterproofing.

Ideal to avoid dusting of interior walls made of natural stone, exposed bricks, preserving the original matte appearance.

ADVANTAGES

• Provides a natural matte effect
• High concentration: it can be used both pure (in the treatment phase) and diluted in water (in the maintenance phase)
• If you wish to increase the degree of shine, achieving a satin effect, it is possible to polish by rubbing with a mop or cloth.
• Completely removable
• High self-leveling power and great adhesion capacity
• Effectively repels dirt and dust

IDEAL FOR

• Mud
• Extruded Stoneware
• Unpolished Stone and Terrazzo
• Stink
• Resin

HOW TO USE

To protect floors and walls : Dilute MATT slightly to facilitate application by adding a glass of water per liter of product. With a clean and dry surface, apply MATT with a brush or other similar applicator evenly.

Wait until completely dry (at least 1 hour) and apply a second coat. Wait for complete drying before transiting. If you want a satin finish, it is enough to polish it afterwards by rubbing it with a mop or cloth. On clay and porous stone pavements, it is necessary to previously apply a waterproofing base to be chosen according to the material and the desired shade (e.g. W68, FOB, WETECO).

For maintenance: Renewal of the finish (e.g. every 2/3 months): with a clean and dry surface, dilute MATT in water in a proportion of 1:10 (500 ml in 5 liters of water) and apply with a damp cloth or other similar applicator. . Wait for complete drying before transiting. For the anti-dusting treatment: with a clean and dry surface, apply pure MATT with a brush evenly. Wait an hour for drying.

ATTENTION ! It is possible to remove the product using PS87 PRO stripping detergent. Do not use on exterior surfaces and in humid environments (e.g. showers). The product slightly revives the tone of the materials, carry out a test beforehand on a small area of the surface.

PERFORMANCE

With one liter of product you can treat:

Mud : 30 m²

Stone : 30/40 m²