Fila PHZERO Energetic Acid Descaler Bottle 1L

Removes dirt from the work and installation residues. Eliminates saline efflorescence. Cleans and descales. Ideal in cases of intense dirt on very porous materials.

ADVANTAGES

• Biodegradable
• Detergent product with buffered acid: it does not release toxic gases, respecting health and the environment.
• Compared to other pure acid descalers, which end their action in a few seconds, it maintains a prolonged action.
• It is dense, therefore, it is suitable for use on vertical walls.
• Descales and cleans at the same time because it contains a high concentration of surfactants

IDEAL FOR

• Mud
• Extruded stoneware
• Porcelain stoneware

HOW TO USE

Dilution : Dilute in water in a proportion of up to 1:5 (1 part of product in 5 parts of water) depending on the level of dirt. On walls it can be used pure, taking advantage of its density.

Application :

For final cleaning of pavement work: In absorbent materials such as mud and stones, it is advisable to previously wet the surface with water. Dilute 1 liter of PHZERO in up to 5 or 10 liters of water, depending on the level of dirt. Leave it to act for a few minutes on the surface. Scrub with a brush, scouring pad or rotary machine with a suitable disc. Collect the residue (a liquid vacuum cleaner is ideal) and rinse with water at the end. For walls and vertical surfaces: Pre-wet the surface with plenty of water. Apply the pure product with a brush. Leave it on for about 4-5 minutes, scrub with a brush or other similar instrument and rinse thoroughly with water, if possible with water pressure.

ATTENTION ! PHZERO is a highly concentrated product: it is recommended to use it when the level of dirt is high. Do not use PHZERO on marble and in general on materials sensitive to acids. Carry out a preliminary test on a small surface area to find out the resistance of the material to the product.

PERFORMANCE

With one liter of product you can treat:

Mud (1:5): 20 m2

Stoneware, porcelain (1:5): 40 m2