Fila Pre-grouting Protection Bottle 1L PRW200

Ideal for absorbent materials such as clay, extruded stoneware, rustic natural stone, artificial stone and cement derivatives.

ADVANTAGES

• Protects against grouting dirt
• Does not alter the adhesion of the joint to the material
• Facilitates final cleaning of work
• Reduces drying times by speeding up the next treatment if applicable
• Does not alter the appearance and allows the material to breathe
• It does not create a superficial film, it is a deep product that resists final cleaning of the work.
• Easy application
• Once applied it is possible to carry out any subsequent treatment
• Product with very low VOC emissions: GEV certified and EC1PLUS marking contributes to Leed credits for Eco-compatible buildings

IDEAL FOR

• Unpolished natural stone and terrazzo
• Mud
• Extruded Stoneware

HOW TO USE

Does not dilute: ready to use.

Application :

Shake before use. Sweep the surface to be treated well. Apply PRW200 with a brush, evenly avoiding puddles of product. Also apply to the edges of the placed material. The day after the application, carry out the grouting, finishing with a sponge to remove all excess cement before it dries. Once the joint has set, carry out the appropriate final cleaning of the work using the appropriate detergent. Evaluate the following treatment to complete the protection. FOR PROFESSIONAL USE ONLY: on vertical surfaces apply with a sprayer (airless system) impregnating the material well and using the appropriate DPI as indicated in the safety sheet.

ATTENTION ! Test the product on a small surface area to check for possible color changes. Do not apply the product if rain is expected.

PERFORMANCE

With one liter of product you can treat:

Extruded stoneware: natural

15/20 m²: Mud

manual and mechanical: 5/10 m2

Natural and artificial stone: 10/20 m2